<aside> 💡

Get your SIP registration details for the device line; more information can be found here.

</aside>

1. Access the phone’s web UI through a web browser.
2. Go to ‘Setup’ -> ‘Identity 1’.
3. From the ‘Login’ tab, enter the below information corresponding to the device line of the phone from **Nebry UC.

Example of SIP details from Nebry UC of a device line.**

![](<https://s3-eu-central-1.amazonaws.com/euc-cdn.freshdesk.com/data/helpdesk/attachments/production/103052813619/original/1QWZcaUpVn2r6lpqgPHuqVzLR4EjQ_Gqag.png?1695987807>)

1. Account = **Account / Username**
    
    ![](<https://s3-eu-central-1.amazonaws.com/euc-cdn.freshdesk.com/data/helpdesk/attachments/production/103065156413/original/JgOSVl3brFD6RurcPP33fV8w7U3Q2Wt5Yw.png?1700139444>)
    
2. Authentication Username = **Account / Username**
    
    ![](<https://s3-eu-central-1.amazonaws.com/euc-cdn.freshdesk.com/data/helpdesk/attachments/production/103065155864/original/YOqVn7PlJgmuWaNGnYjt2MY_k4d9pt2mlg.png?1700139391>)
    
3. Password = **Password**
    
    ![](<https://s3-eu-central-1.amazonaws.com/euc-cdn.freshdesk.com/data/helpdesk/attachments/production/103065152759/original/NrMAhk3gm0uAxI-tqE6X6LVeVeaNTJjiXA.png?1700139083>)
    
4. Registrar = **SIP Server / Proxy**
    
    ![](<https://s3-eu-central-1.amazonaws.com/euc-cdn.freshdesk.com/data/helpdesk/attachments/production/103065154149/original/U7h7l5gGFGtKA66q-u9FctNCFMiApBgXhA.png?1700139208>)
    
5. Outbound Proxy = This must consist of a combination of the below.
    1. **SIP Server / Proxy**
    2. Port = 5061
    3. Transport = TLS
    4. An example of a complete address for the outbound proxy is:
    "sbc01-de02-eu.nebryexample.com:5061;transport=tls"
        
        ![](<https://s3-eu-central-1.amazonaws.com/euc-cdn.freshdesk.com/data/helpdesk/attachments/production/103065155442/original/qy7RP9R0jR4ahpWs-Ekmlxy2SUhy9ydKsw.png?1700139333>)
        
        ![](<https://s3-eu-central-1.amazonaws.com/euc-cdn.freshdesk.com/data/helpdesk/attachments/production/103065152170/original/E_-x6Pko-DCloamxYSW55VFsdQKWdtVIXg.png?1700139015>)
        
6. Leave everything else as it is, and click on **'Apply'** to save the changes.

4. From the ‘RTP’ tab, enable only the below codecs in the correct order.

   1. G722, PCMU, PCMA, Telephone-event

      

5. From the same 'RTP' tab, enable media encryption.

   1. RTP/SAVP = Compulsory

      

   2. SRTP Auth-Tag = AES-80

      

6. Click ‘Apply’ to make the changes.

7. Go back to the ‘Login’ tab and activate the identity.

   

8. Click ‘Apply’ again to save the changes.

9. Click 'Save' to make the changes permanent.